Connecting the remote to your device is an easy process. But first, you need to ensure that your remote has the right batteries. Also, make sure that there are no bad wire connections anywhere and the devices are powered on. Now, follow these instructions to set up your remote successfully:. You just need to enter the device codes to connect the devices together. Here are all the steps that you need to take:. Here are all the steps you need to take:.
Now do the same process for other devices at your home to operate all of them with a single remote. Step 8: Once your component turns on, you have found the correct code. You must save the new code by pressing and releasing the "STOP" key. Step 1: Manually turn on the component you want the remote to control and keep the remote pointed at it. The indicator light turns on and remains on. The indicator light turns off. Step 4: After holding down both keys for 3 seconds, the indicator light turns back on.
If your component turns off, you have found the correct code. Step 7: Once you have found the correct code, you must save the new code by pressing and releasing the "STOP" key. If you used the Auto or Manual Code Search method to program your remote you may want to find out and record the code for future reference.
Retrieving the actual code and writing it down will save you time if you ever need to program the remote again when you change the batteries for example. If the codes are recorded, you can use the Direct Entry method to reprogram your remote, which is quick and easy. Step 5: Starting with the number "1" key, press and release each number key on the keypad in the following order: "1" to "9", then "0".
The remote tests the next code in the batch. When it does, press STOP. Then, wait two seconds to see if your device turns off again. NOTES Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality.
The remote exits the Auto Code Search. Repeat the Brand Code Search from the beginning. Once the unit turns back on, you have found another code that operates the device. Press the STOP key. If the code stored does not give maximum functionality, try another code. Brand Code Search The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy. The remote tests the next code for your brand.
Circle the number for your brand and keep the list handy. Code Lists Brand Codes are used for programming using the. Mitsubishi Panasonic Sharp. Press that number on the remote keypad. The remote exits the Brand Code Search.
0コメント