Our skilled technicians will identify the problem and get your car back on the road as soon as possible. Contact us today to learn more about our services at or fill out our online quote request. Tags: auto glass , auto glass care , door glass , glass care , Vehicle care. Call Us. Find Us. Start on the left side of the window. Spray the moly lubricant into the rubber seal from the top of the window frame and work your way down.
Repeat this process on the right side of the same window. Make sure that the lubricant is well distributed all down the vertical frame of the window, reaching down to the bottom corner of the seal.
Use the rag to wipe around the window seal, door frame or body of the car. Wait a few minutes, then roll up the window. Make the glass go up and down two or three times to ensure that the silicone grease gets down into the track. A power window may move slowly for a number or reasons, however most fixes for a slow power window are quick and inexpensive. A low battery may make the power windows move slowly. A low battery will typically affect all of the windows and may be noted in the operation of other electrical devices, as well.
A car with a low battery should be tested at a repair or parts store to determine the source of the problem. Sometimes, you will wind up having issues with your window motor as well. You see, your car power windows operate using an electric motor. The lift motor may simply be on its last legs if the window is raising and lowering slowly. This happens over time, and if the motor is more than 10 years old, you should not be surprised by this development.
It will not look any different or anything when you take the door panel apart to take a look. It is simply going to be one of the common causes of your power windows not working properly. Replacing a window motor is relatively simple and you can buy what you need at any major auto parts store.
Your power windows are going to be held in a frame that is made out of either metal or plastic. An electric motor moves it up and down. Sometimes, a lack of lubrication can cause the power windows to go down slower than they normally would. Over time, the lubrication may be lost and this will make it more difficult for things to work as they should. Sometimes, your motor and the other moving parts will wind up losing the necessary lubrication.
This can also impact how everything binds together and the windows will just not work as good as they should. What you want to do to fix this is to clean the electrical contacts on your motor. After this, you can liberally apply lubricant to all of the moving parts to get things working right once more. If your power windows are struggling to go up and down, then it is possible that you have a physical blockage issue on your hands.
This can be a bit of work to fix, but it will not be impossible to do on your own. Your windows may not be on the track properly or there may be something preventing the windows from working like normal. You can take things apart to get it back to normal. One common physical blockage issue is when you develop a worn down gasket in your power windows. Your windows go up and down through your gasket and it will not work properly when the gasket is going out.
Simply replacing the old gasket may be enough to fix all of your issues. It should also be known that the frame of the window can become loose. This can create a physical blockage problem, too.
When the window loses its bind, it is going to have problems going up and down. This can be solved in a similar fashion to the lubrication issues. You will want to get everything back on track to fix the binding issues.
Sometimes, you may wind up having a problem with a blown out fuse or one that is not working properly. This is usually going to be the case when the windows are not working at all. It is less likely that this is the issue when the windows are working, but are going up and down slowly.
0コメント